Advanced Design Tutorial
Advanced Design Tutorial
Advanced Design Tutorial
written by Oblique
Introduction
Designing is annoying. Designing other peoples' maps is even more annoying. Playing a badly designed map is also annoying. Actually that's not true, since most people just play with entities and don't care. But having a well designed map will make people take your map a little more seriously. So you really should always design your own maps and do it well.
Since many people seem to be a little unclear on concept, design is not about the gameplay or flow or layout of the map. It's about the appearance. Above all, design should not be unclear or confusing. Though this is of course important, it is not the focus of this tutorial. Here, I'm going to talk about attractiveness.
For this tutorial, I'm going to assume that you're familiar with most of the editor's functionalities, so that we can focus less on technique and more on concepts.
One important note before you start reading: when I show a screenshot and say "this is a good example," I do not mean that it is the only way to do it. Every map should have a unique style. Ultimately, it's up to you to decide what looks right and what doesn't.
General Advice
Choose a theme. Then choose a color palette. Is your map going to be dark or light? What colors are you going to use? How many colors?
Usually it's better to have no more than two colors for your map, with a maximum of three. When I refer to colors, I am not referring to the colors of the individual itty-bitty pixels. I am referring to the overall colorization of layers. For example, I might say that the color of jungle_doodads is green, even though the treasure chest and the tee-hut are different colors.
Another important thing to mention is that shades of grey (includes white and black) are not usually counted as colors. So your freeze layer is not going to be counted as a color (unless you colorize it, which I will talk more about later). With some experience, you'll realize that fewer is better when it comes to colors. In the end, it's the maps with a sense of atmosphere that become known for their design (e.g. Justice 2).
Note: Maps with all black tilesets generally are bad. They can be confusing and they're usually ugly. Unless your map is Mud.
Colors
Let's start with an example first.
Another example:
Freeze, Tele, and Other Blobs
For your freeze, tele, and other blobs (hopefully you know what I mean), there are a large number of techniques that can be used. This image should look familiar to many of you:
Another thing that causes many people trouble is when to use freeze inside of walls. In many maps, I see this:
This is a good example of a map with straight style freeze:
Angled tilesets for freeze are suited for either organic or straight styles. However, rounded tilesets look absolutely horrible on organic styles. For example, take at look at these two examples from the map Naufrage: Of course, if you really want to have both a round tileset and an organic style, the best solution is to use a combination of the rounded and angled tilesets. Take a look at this example from the map Naufrage 2:
Unhookables
This is one of the most important determining factors of whether your design is considered decent or not. Please do not do this (referring to the unhookables): This next example is ok, but not great.
Jungle Midground
Here's an example of how it should NOT be done:
Doodads
Use multiple layers, maybe even colorize them differently. Here is a decent example: The problems in this next example are very common:
Stars
Do NOT do this:
Logos
Here is a nice quote from a resident gfx pro:
"Stealing" Designs
Do it if you really want. But that's boring. Also, please stop trying to make crappy ripoffs of Naufrage. And don't you dare use this moon:
Conclusion
There are two kinds of designs that impress me: the first is one that stringently follows the guidelines above and the second is one that does something completely new, but still somehow looks gorgeous. You'll find plenty of maps that satisfy the former (well, not that many), but I can barely think of more than a couple in the latter category.
Above all, I think the best advice I can give you is to always maintain a critical, artistic eye, especially for your own maps. Don't go easy on yourself.
written by Oblique
Introduction
Designing is annoying. Designing other peoples' maps is even more annoying. Playing a badly designed map is also annoying. Actually that's not true, since most people just play with entities and don't care. But having a well designed map will make people take your map a little more seriously. So you really should always design your own maps and do it well.
Since many people seem to be a little unclear on concept, design is not about the gameplay or flow or layout of the map. It's about the appearance. Above all, design should not be unclear or confusing. Though this is of course important, it is not the focus of this tutorial. Here, I'm going to talk about attractiveness.
For this tutorial, I'm going to assume that you're familiar with most of the editor's functionalities, so that we can focus less on technique and more on concepts.
One important note before you start reading: when I show a screenshot and say "this is a good example," I do not mean that it is the only way to do it. Every map should have a unique style. Ultimately, it's up to you to decide what looks right and what doesn't.
General Advice
Choose a theme. Then choose a color palette. Is your map going to be dark or light? What colors are you going to use? How many colors?
Usually it's better to have no more than two colors for your map, with a maximum of three. When I refer to colors, I am not referring to the colors of the individual itty-bitty pixels. I am referring to the overall colorization of layers. For example, I might say that the color of jungle_doodads is green, even though the treasure chest and the tee-hut are different colors.
Another important thing to mention is that shades of grey (includes white and black) are not usually counted as colors. So your freeze layer is not going to be counted as a color (unless you colorize it, which I will talk more about later). With some experience, you'll realize that fewer is better when it comes to colors. In the end, it's the maps with a sense of atmosphere that become known for their design (e.g. Justice 2).
Note: Maps with all black tilesets generally are bad. They can be confusing and they're usually ugly. Unless your map is Mud.
Colors
Let's start with an example first.
- Do you see the big tee-hut in the background? It's supposed to be part of the background, but it's the exact same color as the doodads in the foreground. The same thing applies to the other jungle bushes in the background. With that, you have a both a confusing and pretty ugly background. A good solution would be to colorize the background to be darker. However, in this case, I might just use a different background since it's so distracting and odd looking.
Another example:
- Please do not ever use large swaths of straight black in your map, ever. Nothing in real life is ever 100% black, so it doesn't make much sense to have it in your map either. If you do have something that you think should be black, just make it a dark grey or make it slightly transparent (or both).
- Another thing you'll notice about this map is that the black background city silhouette looks completely out of place when it's placed against such a light blue sky. In fact, if you look at the map holistically, you might think that the sky is more out of place than the city silhouette, especially when considering the darkly colorized unhookables.
Freeze, Tele, and Other Blobs
For your freeze, tele, and other blobs (hopefully you know what I mean), there are a large number of techniques that can be used. This image should look familiar to many of you:
- I personally greatly prefer the method on the left, because it's makes more sense and looks prettier in almost every way. The basic_freeze tileset has this a bit bugged, so I use the ddnet_tiles tileset instead, though my version is slightly edited.
Another thing that causes many people trouble is when to use freeze inside of walls. In many maps, I see this:
- You can see the gaps between the unhookables and the freeze.
- Here, instead of seeing gaps, you see the freeze "bleeding through" the unhookables.
- I realize that this is largely a matter of personal preference, since a lot of people think this is fine.
This is a good example of a map with straight style freeze:
- Notice that this map uses the rounded tileset of freeze.
- Almost all gores maps can be considered as having an organic style of freeze.
- Notice that this map uses the angled tileset of freeze (ddnet_tiles).
Angled tilesets for freeze are suited for either organic or straight styles. However, rounded tilesets look absolutely horrible on organic styles. For example, take at look at these two examples from the map Naufrage: Of course, if you really want to have both a round tileset and an organic style, the best solution is to use a combination of the rounded and angled tilesets. Take a look at this example from the map Naufrage 2:
- Notice that the freeze around the edge is angled, instead of rounded.
Unhookables
This is one of the most important determining factors of whether your design is considered decent or not. Please do not do this (referring to the unhookables): This next example is ok, but not great.
- This was made using the automapper.
- The marked areas show the ugly repeated tiles.
Jungle Midground
Here's an example of how it should NOT be done:
- The color is completely out of place and the shape of the bushes is just weird (and reminiscent of a Rorschach test, come to think of it).
- The lighter midground is made with the tileset and the darker midground below is made with the quad. I have no preference for either. The tileset takes longer but gives you more variety, but the quad is much faster and has about the same results when it is done right. One downside of using quads is its tendency to murder your fps, especially when it's used in multiple layers.
- Notice how the midground is "separate" from the main tiles. Personally, I think this is the way it should be done. By definition, the midground is between the background and the foreground. Though it should serve to complement the foreground, it should not be completely attached to it, as shown in the first example. Looking at classic maps like ctf4 and ctf_tantum, you can tell that they were done in the same manner as in the latter example.
Doodads
Use multiple layers, maybe even colorize them differently. Here is a decent example: The problems in this next example are very common:
- Because of the red theme of the map, the color of the doodads are colorized red as well. This looks fine on the bushes. However, doodads such as the tee-hut and the dangling ropes look very odd because of this. The solution is to simply add a differently colorized layer on top.
Stars
Do NOT do this:
- First of all, read the quad scaling and cutting tutorial.
- Second of all, don't be lazy.
- Also here's a link to the original thread, in you case you haven't seen it.
- If you want to make your own, make sure the stars have different opacities and be sure to rotate them. Also, have several layers of them with different amounts of parallax.
Logos
Here is a nice quote from a resident gfx pro:
I personally use and can recommend Inkscape for doing them.Soreu wrote: I'd suggest you to wait until the map is finished before creating a logo.
Not only because you don't want to waste time making a great logo for a map that eventually won't be released, but more importantly, because logo should fit the map & often is (or, well, should be) created based on how the map actually looks. Colors, fonts, effects, and additional elements should depend on "character" & style of the design - and imagination of design and "character" of the map often tends to change few times during creating it.
And please, do not use Cool Text online logo generator - if you really have to, I beg you, at least stay away from "Skate", "Muddy" and "Epic Stone" styles - these are overused already, and have actually never looked good (maybe eventually except for the first time they were used, since then it was "new")
"Stealing" Designs
Do it if you really want. But that's boring. Also, please stop trying to make crappy ripoffs of Naufrage. And don't you dare use this moon:
Conclusion
There are two kinds of designs that impress me: the first is one that stringently follows the guidelines above and the second is one that does something completely new, but still somehow looks gorgeous. You'll find plenty of maps that satisfy the former (well, not that many), but I can barely think of more than a couple in the latter category.
Above all, I think the best advice I can give you is to always maintain a critical, artistic eye, especially for your own maps. Don't go easy on yourself.
Last edited by Oblique. on Mon Aug 15, 2016 2:45 am, edited 9 times in total.
A is for Apple.
Re: Advanced Design Tutorial
Good tutorial, thanks for your work :)
I added the headline and linked it in the tutorial list.
You might want to put all the images in spoilers, it would be even better to read then and more user-friendly. But that's just a suggestion.
I added the headline and linked it in the tutorial list.
You might want to put all the images in spoilers, it would be even better to read then and more user-friendly. But that's just a suggestion.
- Soreu
- Posts: 1371
- Joined: Fri Aug 22, 2014 2:47 pm
- Location: Poland
- Player profile: http://ddnet.tw/players/Soreu
- Mapper profile: http://ddnet.tw/mappers/Soreu
- Clan: GSP
Re: Advanced Design Tutorial
GJ, didn't expect that until end of the month I will find post that I would actually enjoy to read - and yet you wrote one it in the last day.
If I would ever manage to write tutorial about designs of maps that often annoy me a lot - that's probably how it would look like, though wouldn't sound/look so good :P
But aside from that, I'd like to add this:
If I would ever manage to write tutorial about designs of maps that often annoy me a lot - that's probably how it would look like, though wouldn't sound/look so good :P
But aside from that, I'd like to add this:
- I'd suggest to wait with the logo until the map is finished.
Not only for the not-wasting-time on creating great logo for map that eventually won't be released, but more likely, because logo should fit the map & often is (or, well, should be) created based on how the map actually looks. Colors, fonts, effects, additional elements, should depend on "character" & style of the design - and imagination of design and "character" of the map often tend to change few times during creating it.
„Vince te ipsum” :3 | GSP Founder Honorary iMTGmember Graphic-guy | Website & Forum Team Leader (Ex) [ToP] Leader (Dead) Last truly active: Sun Aug 28, 2016 11:13 pm - having great DDNet in both memory and heart
- Lady Saavik
- Posts: 1763
- Joined: Tue May 13, 2014 4:02 pm
- Player profile: http://ddnet.tw/players/Lady-32-Saavik/
- Mapper profile: http://ddnet.tw/mappers/Saavik/
Re: Advanced Design Tutorial
Some things sound like your own opinion, but +++ for last sentence about sun/moon ![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
Re: Advanced Design Tutorial
Pretty detailed and well written tutorial, Good job Oblique. ![Smile :)](./images/smilies/icon_e_smile.gif)
![Smile :)](./images/smilies/icon_e_smile.gif)
Re: Advanced Design Tutorial
@Index: Thanks! I personally don't like it when there are a ton of spoiler tags, since that means I have to keep clicking on them, but I'll think about it.
@Soreu: Thanks, added.
@Lady Saavik: Yeah, I didn't want to name the thread "My Supreme Opinion on Design" though. Also, thanks for the stars, hopefully that's ok with you.
@forsaken HELLO.
Cleaned up some grammar and layout issues.
@Soreu: Thanks, added.
@Lady Saavik: Yeah, I didn't want to name the thread "My Supreme Opinion on Design" though. Also, thanks for the stars, hopefully that's ok with you.
@forsaken HELLO.
Cleaned up some grammar and layout issues.
A is for Apple.
- gdin
- Posts: 405
- Joined: Wed Dec 10, 2014 5:25 pm
- Location: USA
- Player profile: http://ddnet.tw/players/gdin
- Mapper profile: http://ddnet.tw/mappers/dinner
- YouTube: user/iDDinner
Re: Advanced Design Tutorial
I disagree with a lot of the "correct" design choices shown, but very nice and detailed tutorial hehe.
Re: Advanced Design Tutorial
I changed the sub-section of freeze in walls, after I realized that dinner is actually really ugly delicious.
Last edited by Oblique. on Wed Dec 27, 2017 12:33 am, edited 1 time in total.
A is for Apple.
Re: Advanced Design Tutorial
wow! thanks, this really helped me learn how to make better maps. can you make a tutorial on backgrounds?
Who is online
Users browsing this forum: No registered users and 39 guests